将调节好的连接组件套入冷热水
管遥 根据浴缸落水安装说明选择适
当的安装高度袁连接浴缸落水袁用六
角扳手渊5冤锁紧固定螺钉渊6尧9冤遥
堵住两个管段袁打开主供水源袁检查
并修理有漏水的接口遥 关闭主供水
源遥
适用于所有加工处理过的表面院以
中性肥皂温水清洗镀层表面袁再以
干净的软布彻底擦干整个表面遥 许
多清洁剂袁比如氨水尧去污粉及洁厕
灵等袁会对电镀表面造成伤害而不
宜使用遥
有腐蚀性的清洁剂或溶剂不可使用
于科勒牌的水龙头及其附件上遥
1085772-2-AA/Rev00
Slide connection assembly onto the hot and
cold riser tubes. Position and connect to the
bath drain .Secure screws(6, 9) by hex
wrench(5).
Install plugs on hot and cold pipes. Turn on
the main water supply. Check for leaks.
Repair as required. Turn off the main water
supply.
All Finishes: Clean the finish with mild soap
and warm water. Wipe entire surface
completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as
ammonia, chlorine, toilet cleaner etc. which
could adversely affect the finish and are not
recommended for cleaning.
Do not use abrasive cleaners or solvents on
Kohler faucets and fittings.