Download Print this page
Kohler Evoke 6332A-4 Installation Instructions

Kohler Evoke 6332A-4 Installation Instructions

Kitchen mixer with pullout spray

Advertisement

Quick Links

VOKE
INSTALLATION INSTRUCTIONS
Kitchen Mixer With Pullout Spray
6332A-4
KITCHEN MIXER WITH PULLOUT SPRAY
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes throughly to remove debris.
2. An in line water filter must be used with this product.
3. Inspect the supply pipes for damage and leakage. Replace and maintain as necessary
4. Observe local plumbing codes.
5. If possible, install this faucet before installing the sink.
6. Recommended working pressure: 1 to 5 bar. If it exceeds 5 bar, a pressure reducer is needed. The highest
water and environment temperature is 60ºC.
7. All installations should comply with the relevant requirements of AS/NZS 3500 and AS/NZS 6400.
ROUGH-IN DIMENSIONS
Lift the handle gently. Turn backwards for hot water, turn frontwards for cold water.
ROUGH-IN DIMENSIONS
203
82
KOHLER
Min Ø35
G1/2˝
1117849-AN2-A
1

Advertisement

loading

Summary of Contents for Kohler Evoke 6332A-4

  • Page 1 KITCHEN MIXER WITH PULLOUT SPRAY BEFORE YOU BEGIN All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
  • Page 2 Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could Screw adversely affect the finish and are not recommended for cleaning. Do not use abrasive cleaners or solvents on Kohler faucets and fittings. **Color code must be specified when ordering 1117849-AN2-A...