Manual Mode - Electrolux PURE A9 Instruction Book

ENGLISH
Thank you for choosing an Electrolux air purifier.
Always use original accessories and spare parts to
get the best results. This product is designed with the
environment in mind. All plastic parts are marked for
recycling purposes.
BEFORE STARTING
• Read this manual carefully.
• Check that all parts described are included.
• Pay special attention to the safety precautions!
Picture pages 2-4
BEFORE FIRST USE
Place the product according to the instructions
below for optimal operation and results:
1
Operate the air cleaner in an enclosed area.
Close all doors, windows, and other openings
connecting to the outside of the room.
2 Place the air cleaner in a location that does
not restrict the airflow through the top of the
appliance.
3
The appliance must be placed on a leveled floor
that can support it.
4
There should be a minimum of 30 cm of clearance
around the appliance.
Remove the plastic protective bag from the
multi-layer filter:
5
Pull the Fabric handle outward to remove the air
intake door.
6
Take out the multi-layer filter pulling it out by the
handle.
7 Remove the plastic protective bag from the multi-
layer filter.
8
Reinstall the multi-layer filter into the appliance.
OPERATION INSTRUCTIONS
TO TURN ON THE APPLIANCE
9 Plug in the appliance and tap (touch and release)
the " " button to turn it on.
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality, during this time the
Loading LED and the Air quality light will pulsate
slowly in white. Each time the appliance is turned
on the SMART mode is activated automatically
and the fan runs in low speed until the air quality
analysis is complete.
SMART MODE
10 In this mode, the appliance will choose the fan
speed automatically, based on the air quality level.
This is the default mode each time the appliance
is turned on.
NOTE: In "SMART" mode the fan speed cannot be
www.electrolux.com
changed manually.
About the Air quality light
11 The appliance has an air quality sensor that
analyzes the air quality.
The air quality light will show the real-time air
quality through different colors of light. As shown
below:
LIGHT'S COLOR PM 2.5 (μg/m
Blue 0-15
Green 16-35
Orange 36-75
Red Above 75
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality each time the appliance
is turned on. During this time, the air quality light
will pulsate slowly in white.
Very high humidity conditions in the room might
produce condensation in the sensors. This could
affect the accuracy of the sensor readings.

MANUAL MODE

12 Tap the "MODE" button to switch the appliance to
"MANUAL" mode. In this mode, the fan speed can be
changed manually by touching the Fan speed slider.
NOTE: The fan speed will change gradually after a
new fan speed is selected.
WIFI FUNCTION
13 This appliance is equipped with a WiFi module,
which enables remote control and access to the
full functionality of the system via our smartphone
app. Download our Pure A9 app and follow the
instructions for how to connect it with your
appliance. When the connection is stablished, the
WiFi indicator will light up.
CHILD LOCK FUNCTION
14
The Child lock can be activated and deactivated
by long pressing the On/Off and the Mode button
simultaneously for 4 seconds. This function can
also be activated or deactivated via the PURE A9
app. When the Child lock is activated, the control
panel of the appliance cannot be interacted with
and the Child lock indicator light up.
FILTER CHANGE INDICATOR
15 The filter change indicator will light up to remind
you to change the filter. Refer to the instructions
in the Pure A9 app or the Electrolux website on
where to purchase replacement filters. Ensure
the plastic protective bag is removed from the
replacement filter before use. After the filter is
replaced, the filter change indicator will turn off
automatically.
NOTE: The multi-layer filter cannot be washed, it
can only be replaced.
EN
CS
CT
KR
TH
3
) AIR QUALITY
Good
Average
Poor
Very Poor
7