ENGLISH
Always use original accessories and spare parts to
get the best results. This product is designed with the
environment in mind. All plastic parts are marked for
recycling purposes.
BEFORE STARTING
• Read this manual carefully.
• Check that all parts described are included.
• Pay special attention to the safety precautions!
Picture pages 2-4
BEFORE FIRST USE
Place the product according to the instructions
below for optimal operation and results:
1
Operate the air cleaner in an enclosed area.
Close all doors, windows, and other openings
connecting to the outside of the room.
2
Place the air cleaner in a location that does
appliance.
3
that can support it.
4
There should be a minimum of 30 cm of clearance
around the appliance.
Remove the plastic protective bag from the
5
Pull the Fabric handle outward to remove the air
intake door.
6
handle.
7
Remove the plastic protective bag from the multi-
8
OPERATION INSTRUCTIONS
TO TURN ON THE APPLIANCE
9
Plug in the appliance and tap (touch and release)
the " " button to turn it on.
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality, during this time the
Loading LED and the Air quality light will pulsate
slowly in white. Each time the appliance is turned
on the SMART mode is activated automatically
and the fan runs in low speed until the air quality
analysis is complete.
SMART MODE
10
In this mode, the appliance will choose the fan
speed automatically, based on the air quality level.
This is the default mode each time the appliance
is turned on.
NOTE: In "SMART" mode the fan speed cannot be
6
changed manually.
About the Air quality light
11
The appliance has an air quality sensor that
analyzes the air quality.
The air quality light will show the real-time air
below:
LIGHT'S COLOR
PM 2.5 ( g/m
Blue
0-15
Green
16-35
Orange
36-75
Red
Above 75
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality each time the appliance
is turned on. During this time, the air quality light
will pulsate slowly in white.
Very high humidity conditions in the room might
produce condensation in the sensors. This could
MANUAL MODE
12
Tap the "MODE" button to switch the appliance to
"MANUAL" mode. In this mode, the fan speed can be
changed manually by touching the Fan speed slider.
NOTE: The fan speed will change gradually after a
new fan speed is selected.
WIFI FUNCTION
13
This appliance is equipped with a WiFi module,
which enables remote control and access to the
full functionality of the system via our smartphone
app. Download our app and follow the
instructions for how to connect it with your
appliance. When the connection is stablished, the
WiFi indicator will light up.
CHILD LOCK FUNCTION
14
The Child lock can be activated and deactivated by
long pressing the On/Off and the Mode button
simultaneously for 4 seconds. This function can
also be activated or deactivated via the app. When
the Child lock is activated, the control panel of the
appliance cannot be interacted with and the Child
lock indicator light up.
FILTER CHANGE INDICATOR
15
The filter change indicator will light up to remind
you to change the filter. Refer to the instructions
in the app or the Electrolux website on where to
purchase replacement filters. Ensure the plastic
protective bag is removed from the replacement
filter before use. After the filter is replaced, the
filter change indicator will turn off automatically.
NOTE:
can only be replaced.
3
)
AIR QUALITY
Good
Average
Poor
Very Poor
www.electrolux.com
Need help?
Do you have a question about the PUREA9.2 and is the answer not in the manual?