Advertisement
CONNECT THE WAN INTERFACE
Figure: Connectors/indicators on the Dual SHDSL Interface Module
Connector 1 is implemented for single channel SHDSL over
one twisted pair or dual channel SHDSL over two twisted pairs in the
same cable. For dual-channel SHDSL with separate cables for each
channel, connect the RJ11 SHDSL cable (provided) to connector 1
and a second RJ11 SHDSL cable (not provided) to connector 2.
Connect the other end of both cables to the network operator's
SHDSL jacks.
CONNECT THE LEGACY INTERFACE
There is a specific cable for each legacy mode.
Figure: Connector on the Legacy V.35/V.36/X.21 Interface Module
8
Cable Connection
Advertisement
