1. Manuals
  2. Brands
  3. Christie Manuals
  4. Grill
  5. ICON 1560
  6. Product and assembly manual

Christie ICON 1560 Product And Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Product number 1560, 1561, 1562, 1563,
1564, 1566, 1567, 1568, 1569, 1570, 1571,
1572, 1573, 1574, 1575
+61 3 9708 2999
dachristie.com
ICON Series Cabinet
Standard and Large
Product and Assembly Manual
Please read all relevant parts
of this manual carefully before
commencing product assembly.
ICON Cabinet Product and Assembly Manual 6885_00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICON 1560 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Christie ICON 1560

Summary of Contents for Christie ICON 1560

  • Page 1 ICON Series Cabinet Standard and Large Product and Assembly Manual Product number 1560, 1561, 1562, 1563, Please read all relevant parts 1564, 1566, 1567, 1568, 1569, 1570, 1571, of this manual carefully before 1572, 1573, 1574, 1575 commencing product assembly. +61 3 9708 2999 dachristie.com ICON Cabinet Product and Assembly Manual 6885_00...

  • Page 2: Table Of Contents

    2 | Table of contents GENERAL INFORMATION Safety instructions How to read this manual Manufacturer liability Conditions of use Description Disposal SPECIFICATIONS Siting Guidelines Tools required Specifications STANDARD CABINET DIMENSIONS AND INSTALLATION Standard Cabinet - dimensions | Figure 1 Standard Cabinet - services and footings | Figure 2, 3 Standard Cabinet - boxed contents and parts identification | Figure 4...

  • Page 3: General Information

    General information | ICON Cabinet Product and Assembly Manual 6885_00...

  • Page 4: Safety Instructions

    4 | General information | General information 1.1 Safety instructions Risk of personal injury Risk of damage to the product • Altering the product or variation from the • During assembly, take suitable original specification may result in injury precautions against scratching and void the Product Warranty...

  • Page 5: Manufacturer Liability

    • When disposing of the product, please remove and deliver the metal components to an appropriate recycling facility • Christie appliances are packaged in non-polluting and recyclable materials. Please recycle according to local regulations ICON Cabinet Product and Assembly Manual 6885_00...

  • Page 6: Specifications

    | Specifications SPECIFICATIONS ICON Series Cabinet Standard and Large...

  • Page 7: Siting Guidelines

    • Spanner to suit masonry anchors 2.3 Specifications Christie ICON Series barbecue cabinets are manufactured entirely from stainless steel for ultimate durability and corrosion resistance. ICON cabinets are available in #4 brushed stainless steel finish, or powder coated in an extensive range of powder coating colours.
  • Page 8 | Standard cabinet assembly and installation ICON SERIES STANDARD CABINET dimensions and installation (For ICON Series Large Cabinet installation, see Section 4) ICON Series Cabinet Standard and Large...
  • Page 9 Standard cabinet assembly and installation | 3.1 Standard Cabinet - dimensions Dimensions: 1250 mm wide x 1000 mm deep x 860 mm high Weight: 70 kg (without cooktop) Cooktop cut-out: 495 mm x 495 mm FIG. 1 1250 mm 800 mm 940 mm FRONT 1000 mm...

  • Page 10: Standard Cabinet - Services And Footings | Figure

    | Standard cabinet assembly and installation 3.2 Standard Cabinet - services and footings WARNING: All work on underground services must be carried out only by suitably qualified trades people i.e. electricians or gas fitters. Footings and underground services: • Bring up underground services (electrical conduits, gas and water pipes and waste outlets) in the highlighted areas only •...
  • Page 11 Terminate services for standard cabinet configurations in the locations indicated below. These locations will differ, depending on whether gas or electric cooktops are installed. For Christie CC2 Gas Barbecue Cooktop: • The gas inlet is on the right-hand side when facing the front of the cooktop •...

  • Page 12: Standard Cabinet - Boxed Contents And Parts Identification | Figure

    | Standard cabinet assembly and installation 3.3 Standard Cabinet - boxed contents and parts identification FIG. 4 Christie standard size ICON Cabinets are supplied with the following boxed contents: (1) x Stainless steel benchtop (2) x Side panels (2) x In-fill panels...
  • Page 13 STEP 1 Open the carton and review the boxed contents section relevant to your product model. Check that all listed parts are present. Contact Christie immediately if you notice any discrepancies. Note: Leave the benchtop inside the carton until step 8...
  • Page 14 | Standard cabinet assembly and installation 3.4 Assembly and installation STEP 2 Assemble the cabinet in the final location. Ensure panels are placed in their correct positions before fixing. Locate and unpack the two side panels, foot panel, and rear panel. Remove the in-fill panels from each side panel and set these aside.
  • Page 15 Standard cabinet assembly and installation | 3.4 Assembly and installation FIG. 6 FIG. 7 ICON Cabinet Product and Assembly Manual 6885_00...
  • Page 16 | Standard cabinet assembly and installation 3.4 Assembly and installation STEP 3 Locate the door keys (provided in a bag with these installation instructions) and open the door. Remove the door by releasing the spring-loaded latch pins. Set aside for reinstallation. Remove the lower door panel by sliding the panel upward and then away from the rear panel.
  • Page 17 Standard cabinet assembly and installation | 3.4 Assembly and installation STEP 4 The Cabinet must be square before marking and drilling fixing holes. The internal distance between end panels must be 800 mm (refer FIG 02 in Section 3.2). Place the cabinet in the final fixed position. Tighten all fixings on the rear, side, and foot panels.
  • Page 18 | Standard cabinet assembly and installation 3.4 Assembly and installation STEP 5 Reinstall the in-fill panels into the corresponding side panels. FIG. 11 ICON Series Cabinet Standard and Large...
  • Page 19 Standard cabinet assembly and installation | 3.4 Assembly and installation STEP 6 Install the knee panel. Secure using (19) x M6 bolts. Important: Do not scratch external surfaces when lowering the knee panel. Note: Brushed stainless steel finish panels will have a protective film. Remove the entire film before installation.
  • Page 20 | Standard cabinet assembly and installation 3.4 Assembly and installation STEP 7 WARNING: Services must only be connected by a suitably qualified person, i.e. electrician or gas fitter. If your installation has 240v Power outlets (GPO’s), install these now. Fix services to internal mounting plates or a secure location.
  • Page 21 Standard cabinet assembly and installation | 3.4 Assembly and installation STEP 9 Make sure you have the keys and lock the door latch in the “open” position. The nylon door washer must be installed onto the lower spring- loaded latch pin. Reinstall the lower door panel into the rear panel by inserting the locking tabs into the corresponding holes.
  • Page 22 | Standard cabinet assembly and installation 3.4 Assembly and installation STEP 10 Install the waste container mount, using the locating slots in the lower door panel. Slide the waste container into the mount. If you are using a grease trap, ensure that the overflow faces the cabinet door.
  • Page 23 Standard cabinet assembly and installation | 3.4 Assembly and installation STEP 11 Remove the remaining protective film from all stainless steel surfaces. Installation of your Standard ICON Cabinet is now complete. Please consult the relevant installation instructions for any additional items, such as the barbecue cooktop FIG.
  • Page 24 | Large cabinet assembly and installation ICON SERIES LARGE CABINET dimensions and installation (For ICON Series Standard Cabinet installation, see Section 3) ICON Series Cabinet Standard and Large...
  • Page 25 Large cabinet assembly and installation | 4.1 Large Cabinet - dimensions Dimensions: 2200 mm width x 1000 mm depth x 860 mm height Weight: 100 kg (without cooktop) Cooktop cut-out: 495 mm x 495 mm FIG. 19 2200 mm 1600 mm 1740 mm FRONT 1000 mm...

  • Page 26: Large Cabinet - Services And Footings | Figure

    26 | Large cabinet assembly and installation 4.2 Large Cabinet - services and footings WARNING: All work on underground services must be carried out only by suitably qualified trades people i.e. electricians or gas fitters. Footings and underground services: • Bring up underground services (electrical conduits, gas and water pipes and waste outlets) in the highlighted areas only •...
  • Page 27 Terminate services for standard cabinet configurations in the locations indicated below. These locations will differ, depending on whether gas or electric cooktops are installed. For Christie CC2 Gas Barbecue Cooktop: • Gas inlet is on the right-hand side when facing the front of the appliance •...

  • Page 28: Large Cabinet - Boxed Contents And Parts Identification | Figure

    28 | Large cabinet assembly and installation 4.3 Large Cabinet - boxed contents and parts identification FIG. 22 Christie standard size ICON Cabinets are supplied with the following boxed contents: (1) x Stainless steel benchtop (2) x Side panels (2) x In-Fil panels...
  • Page 29 STEP 1 Open the carton and review the boxed contents section relevant to your product model. Check that all listed parts are present. Contact Christie immediately if you notice any discrepancies. Note: Leave the benchtop inside the carton until step 8...
  • Page 30 30 | Large cabinet assembly and installation STEP 2 Assemble the cabinet in the desired final location. Ensure the panels are placed in the correct positions before fixing. Locate and unpack the two side panels, foot panels, rear panel, and centre strut. Remove the in-fill panels from each side panel and set these aside.
  • Page 31 Large cabinet assembly and installation | FIG. 24 FIG. 25 ICON Cabinet Product and Assembly Manual 6885_00...
  • Page 32 32 | Large cabinet assembly and installation 4.4 Assembly and installation STEP 3 Locate the door keys (provided in a bag with these installation instructions) and open the door. Remove the door by releasing the spring-loaded latch pins. Set aside for reinstallation. Remove the lower door panel by sliding the panel upward and then away from the rear panel.
  • Page 33 Large cabinet assembly and installation | 4.4 Assembly and installation STEP 4 The Cabinet must be square before marking and drilling fixing holes. The internal distance between end panels must be 1600 mm (refer FIG 20 in Section 4.2). Place the cabinet in the desired fixing position. Tighten all fixings on the rear, side, and foot panels.
  • Page 34 34 | Large cabinet assembly and installation 4.4 Assembly and installation STEP 5 Reinstall the in-fill panels into the corresponding side panels. FIG. 29 ICON Series Cabinet Standard and Large...
  • Page 35 Large cabinet assembly and installation | 4.4 Assembly and installation STEP 6 Install the knee panel. Secure using (31) x M6 bolts and (7) x M6 nuts. Important: Do not scratch external surfaces when lowering the knee panel. Note: Brushed stainless steel finish panels will have a protective film. Remove the entire film before installation.
  • Page 36 36 | Large cabinet assembly and installation 4.4 Assembly and installation STEP 7 WARNING: Services must only be connected by a suitably qualified person, i.e. electrician or gas fitter. If your installation has 240v Power outlets (GPO’s), install these now. Fix services to internal mounting plates or a secure location.
  • Page 37 Large cabinet assembly and installation | 4.4 Assembly and installation STEP 9 Make sure you have the keys and lock the door latch in the “open” position. The nylon door washer must be installed onto the lower spring- loaded latch pin. Reinstall the lower door panel into the rear panel by inserting the locking tabs into the corresponding holes.
  • Page 38 38 | Large cabinet assembly and installation 4.4 Assembly and installation STEP 10 Install the waste container mount using the locating slots in the lower door panel. Slide the waste container into the mount. If you are using a grease trap, ensure that the overflow faces the cabinet door.
  • Page 39 Large cabinet assembly and installation | 4.4 Assembly and installation STEP 11 Remove the remaining protective film from all stainless steel surfaces. Installation of your Standard ICON Cabinet is now complete. Please consult the relevant installation instructions for any additional items, such as the barbecue cooktop(s). FIG.

  • Page 40: Options And Accessories

    | Options and accessories ICON Series Cabinet Standard and Large...
  • Page 41 Options and accessories | BARBECUE COOKTOPS CC2 Electric Barbecue Cooktop CC2 Gas Barbecue Cooktop: Natural gas, Liquid petroleum gas, or Universal LPG CC2-i Electric Smart Barbecue Cooktop CC2-i Gas Smart Barbecue Cooktop OPTIONS Sink Hood COLOUR AND FINISH OPTIONS Check our website at https://dachristie.com/barbecues/cabinets for current off-the-shelf finishes, standard powder coating colour options (lead times apply), and custom colours available at extra cost.

  • Page 42: Cleaning And Maintenance

    | Cleaning and maintenance ICON Series Cabinet Standard and Large...

  • Page 43: Safety Considerations

    6.3 Cleaning and general maintenance To preserve the appearance and integrity of your Christie barbecue cabinet, we recommend that the entire structure is cleaned weekly and inspected and serviced every 12 months.

  • Page 44: Cleaning Waste Containers | Figure

    | Cleaning and maintenance 6.4 Cleaning waste containers Waste containers must be emptied on a regular basis. Do not allow the waste container to overflow into the interior of the barbecue cabinet. All fat, grease and oil should be disposed of in accordance with local regulations. Do not dispose of it on the ground, as this will create a health hazard.
  • Page 45 Clean and wash the grease trap with a mild detergent or pH-neutral, biodegradable degreaser, before replacing it inside barbecue surround. A high-pressure cleaner or steam cleaner may also be used. Extra grease traps can be ordered from Christie, to exchange and clean grease traps thoroughly off site...

  • Page 46: Warranty

    | Warranty WARRANTY ICON Series Cabinet Standard and Large...
  • Page 47 (including the Competition and Consumer Act 2010) and which by law cannot be excluded, restricted, or modified. D.A. CHRISTIE PTY. LTD. (“the Company”) warrants that the products manufactured by it are of merchantable quality. The warranty is not transferable and applies only to the original purchaser.
  • Page 48 | Warranty This warranty is in addition to and not in substitution for any warranty given by Law. WARRANTY CLAIM PROCEDURE Warranty service may be obtained by contacting the Company Any claim for warranty must be accompanied by appropriate documentation that provides proof of purchase, details of the alleged defect and serial number The freight to the Company will be at the purchaser’s expense but return freight will be at the Company’s expense...
  • Page 49 ICON Cabinet Product and Assembly Manual 6885_00...
  • Page 50 +61 3 9708 2999 dachristie.com...

This manual is also suitable for:

Icon 1561Icon 1562Icon 1563Icon 1564Icon 1566Icon 1567 ... Show all

Table of Contents