Related Manuals for Dyson 368339-01
Summary of Contents for Dyson 368339-01
- Page 1 User manual In the box Washing your filter Getting started Washing your brush bars Charging your machine Washing your non-powered tools Changing your battery Clearing blockages Emptying your bin Washing your bin...
- Page 2 In the box Wand Dyson omnidirectional Vacuum cleaner soft roller cleaner head Four 360° stabilizing casters allow the cleaner head to glide in all directions, making it easy to navigate around obstacles and clean in tight spaces. Charger Combination tool Charges your vacuum with Two tools in one – wide nozzle and...
-
Page 3: Getting Started
Max mode Delivers maximum power. For intensive cleaning of ground-in dirt. Dyson omnidirectional soft roller cleaner head Four 360° stabilizing casters allow the cleaner head to glide in all directions, making it easy to navigate around obstacles... - Page 4 Charging your machine For the best experience, we recommend fully charging your machine as soon as you open the box and after every clean. The LED light on the end of the handle will flash when the It can take up to 3.5 hours to fully charge your battery. power is running low and to charge your battery.
- Page 5 Emptying your bin Empty your bin as soon as the dirt reaches the MAX mark. You may need to clean the filter more often if you use your machine with a full bin. Press the red wand release button Hold your vacuum over a bin. To close the bin, push the bin base and pull the wand away from the bin.
-
Page 6: Washing Your Filter
Washing your filter Wash your filter at least once a month to maintain the best performance. Make sure the filter is completely dry before refitting. Don’t put any part of your Wash the outside of the Shake to remove any excess To refit your filter, slide it machine in a dishwasher or filter, rubbing with your... - Page 7 Washing your brush bars To maintain optimum performance, check and wash your brush bars regularly. clik Don’t put any part of your machine Hold your brush bars under cold tap Make sure your brush bars are in a dishwasher or use detergents, water and gently rub to remove any completely dry before refitting.
- Page 8 Washing your non-powered tool Combination tool Wipe your non-powered tool with a damp cloth only.
-
Page 9: Clearing Blockages
Clearing blockages If your machine detects a blockage, the motor will pulse Leave your machine to cool down before looking for six times, You won’t be able to use your machine until the blockages and, for your safety, take care not to touch the blockage has been cleared.