Contents Getting started Important safety instructions Quick start Dyson Link app Getting connected: Part 1 Getting connected: Part 2 iOS Getting connected: Part 2 Android Cleaning modes Understanding and optimising your robot. Maintenance Emptying the clear bin Brush bar and track maintenance...
Page 3
Download the Dyson Link app The Dyson Link app allows you to control, monitor and get automatic updates for the Dyson 360 Eye™ robot via your mobile device. Search for the latest Dyson Link app on the App store or Google Play.
Dyson Helpline. responsible person concerning use 5. If there is a problem with your Dyson of the appliance in a safe way and appliance, refer to the diagnostic understand the hazards involved.
Page 5
Dyson Link app. plug. If the supply cable is damaged it 20. Do not operate the appliance in a must be replaced by Dyson, its service room where an infant or child is agent or similarly qualified person in present and unattended.
Page 6
29. The appliance and charging dock must be supplied at their rated Safety Extra Low Voltage, use only the Dyson power adaptor and battery supplied with the product, other types of batteries may burst causing injury to persons and damage.
Quick start Setting Up Charging Preparing the room Open the dock fully to 90° and Place the robot on the dock with the Your robot cleans using powerful place it against the wall. clear bin facing the wall. suction, please: Plug the charging lead into either The battery light, located on the power –...
Page 9
Dyson software on your robot, please Link app. download the Dyson Link app for free on the App Store or Google Play. To update without using the app, download the latest software from: See the 'setting up Dyson Link app' www.dyson.com/support/robots...
Dyson Link app The Dyson Link app allows you to control, schedule and monitor your Dyson 360 Eye™ robot even when you’re not at home. Functionality Choose when your robot cleans by scheduling the time and day of cleaning sessions.
Download the app Ensure you have the Check your Wi-Fi following information: Search for the latest Dyson Link app Check that your dock is set up only a on the App Store or Google Play. short distance from your Wi-Fi router and that it is powered.
Wi-Fi, indicated by a Wi-Fi signal icon in the top light will be showing on the dock. The Dyson Link app is currently only available to iOS left corner of the screen. – Pick up and replace the robot on the dock.
Page 13
Your Wi-Fi needs to be set to 2.4GHz. Can’t connect your robot to the Dyson network? – The Dyson cloud might not have been able to complete your connection, please try again. *Featured content based on version 1 of the app.
Wi-Fi, indicated by a Wi-Fi signal icon in the top The Dyson Link app is currently only available to iOS – Pick up and replace the robot on the dock. left corner of the screen.
Page 15
– Your Wi-Fi needs to be set to 2.4GHz. Can’t connect your robot to the Dyson network? The Dyson cloud might not have been able to complete your connection, please try again. *Featured content based on version 1 of the app.
Cleaning modes Automatic recharging mode Robot cleans all accessible space, recharging at its dock when required. Place the robot on the dock. Press the power button The robot will return to the dock to Ensure the dock is powered and the robot will begin recharge when the battery is low.
Page 17
Go to www.dyson.co.uk/support/robots Single charge mode: Robot cleans the accessible space it can reach on a single charge only. Place the robot on the floor, not on Press the power button and the robot The robot will not recharge when the the dock.
Suction Navigation Cleaning behaviour Your robot uses a Dyson digital motor Your robot uses a 360° vision system Your robot maps out your home into a and full width brushbar to deliver to take a full panoramic image of grid of squares, and cleans it using a powerful cleaning.
Page 19
Go to www.dyson.co.uk/support/robots Your robot uses infra-red sensors When started from the dock your robot Your robot is powered using a lithium- to identify obstacles, drops and the will return to recharge mid-clean before ion battery pack. boundaries of the cleaning space. It automatically resuming and completing then records these on its map.
Emptying the clear bin To empty the bin during a clean press the power button to pause the robot. Once you've finished, return the robot to the same point on the floor, press the power button again to resume cleaning. When dirt reaches the MAX mark Press the cyclone pack release button.
Brush bar and track maintenance To conduct brush bar or track maintenance during cleaning press the power button to pause the robot. When you are ready, return the robot to the same point on the floor, press the power button again to resume cleaning.
Washing and drying the filters Pre-motor filter Wash the pre-motor filter at least every month according to the instructions below to maintain performance. Press the cyclone release button Wash the filter with cold water only. Allow to completely dry naturally and remove the cyclone unit.
Page 23
Go to www.dyson.co.uk/support/robots Post-motor filter Wash the post-motor filter at least every month according to the instructions below to maintain performance. Press in the filter release button and Wash the filter with cold water only. Allow to completely dry naturally slide the filter cover up.
Cleaning optics To get the best navigational performance from your robot, clean the optics frequently. Navigational camera Check all sensor covers and the Headlights navigational camera for dirt, (housed within finger holds) fingerprints or smears. Wipe with a soft, dry, microfibre cloth to clean. Do not use cleaning fluids, liquids or sprays of any kind.
Page 25
To ensure you get the best out of your robot update to the latest software. Automatic updates via the Dyson Link app By downloading the Dyson Link app When an update becomes available Update progress will be indicated by a...
Troubleshooting If your robot encounters a When the problem has been fixed, problem, it will display one of the return the robot to the same point on lighting patterns below. Follow the the floor, press the power button again instructions to fix the issue. and step away to resume cleaning.
Page 27
For more support Software updates Online On the Dyson link app: www.dyson.co.uk/support/robots You can use the Dyson Link app to identify problems, view video guides and take you through simple step-by- step diagnostics to resolve. On the phone: Call our helpline for dedicated support Pink lights indicate a software on 0800 298 0298 between Monday...
Dyson Link app or by manually downloading an • Place the robot on a soft surface if it has to be turned over upgrade via your computer.
Page 29
GUARANTEE TERMS & CONDITIONS • Once complete the robot will turn off. If you have a question about your Dyson appliance, call the • Remove the USB and replace the filter and filter cover. The Dyson Customer Care Helpline with your serial number and robot is now ready to use as normal.
Page 30
You will need to provide us with basic contact information to which it was sold or (ii) if the appliance is used in Austria, register the Dyson Link App; this enables us to securely link Belgium, France, Germany, Ireland, Italy, Netherlands, your product to your instance of the App.
Page 31
This Dyson appliance uses open source software, a full list of all the software and copyright notices together with the full licence terms can be found at www.dyson.com/360eyenotice. Changes may be made when the appliance’s software is remotely updated, please see www.dyson.com/360eyenotice...