Neotherm HeatQ NORD1.0 User Manual page 9

Disassembly of the electric heating element
1. Switch the electric heating element off by pressing the switch and unplug
it.
2. In case of the electric heating element with an electric radiator
disassembly it together with the radiator and turn the electric heating
element upside down. There is no need to remove the heating agent.
3. If the radiator is connected to the central heating close both supply and
return valves. Remove the heating agent from the radiator.
4. Remove the electric heating element from the radiator core with the 22
mm wrench.
CAUTION! The electric heating element must not be held by the cover
while assembling/ disassembling.
Maintenance
CAUTION! While cleaning the electric heating element with detergents or
liquids, unplug the electric heating element. Prevent the controller from
getting wet.
Use soft cloths or sponges for cleaning the surface. Do not use any
aggressive or abrasive cleaning agents in order not to damage the
decorative coat:
- the painted surface should be wiped with warm water with delicate
washing substances,
- chrome-plated surfaces should be cleaned with special cleaning agents
intended for cleaning chrome-plated surfaces.
End of life disposal
After termination of the use the electric heating element must not be
disposed as a municipal waste. The device should be taken to the point of
collection and recycling of electric and electronic waste. Any information
about the proper collection and recycling point may be obtained in the store
or from the manufacturer.
By ensuring wastes are disposed properly you
will help to prevent potential negative
consequences for the environment.
Warranty Terms & Conditions
1. This Warranty is granted to the product manufactured by HeatQ
Technology Sp. z o.o. and specified in this User Manual.
2. The Warranty period is 24 months from the date of original purchase
and for a maximum of 36 months from the date of production. You can
identify the date of production by consulting the serial number on the
back of the enclosure.
3. If you want to claim the product on warranty, submit the claim with the
proof of purchase. Otherwise the manufacturer may reject your claim.
4. When purchasing the product, the buyer shall confirm it is free of
defects. If no defect is claimed, including defects of the decorative
finish of the housing, the product is deemed to be sold without defects.
5. The heating system this product is to be used with shall feature stop
valves at the heating radiator to facilitate its removal or removal of the
electric heater without servicing the entire central heating system and
its full heating medium charge. The manufacturer shall not be liable for
any consequences, including any costs, caused by an improper design
and/or execution of the heating system.
6. This Warranty does not cover any defects caused by improper
installation or removal or misuse of the product. Read and understand
this User Manual, which is an essential part of this Warranty, before
using the product.
7. Having filed a warranty claim, the buyer shall deliver the claimed
product to the manufacturer's headquarters to have it inspected and
repaired, if the claim is not rejected. The manufacturer has 14 working
days from the date of delivery of the product for an expert opinion and
repair of the defective product.
8. If the claimed defect(s) cannot be repaired, the manufacturer will
replace the product with a new one and with equivalent specifications.
English - 9 -