Exchanging The Contact Arrangements - Siemens ELP 319 Operating And Service Manual

12.4.3 Exchanging the Contact Arrangements

Both the movable and the fixed contact arrangement must be exchanged each time the ELP 319 end
position detector is repaired (see Figure 18).
For removing contact arrangements 2 and 4, remove the fastening bolts 1 and unscrew the wiring 3.
For fitting the contact arrangements, carry out the same steps in reverse. Adjust distance A as
described in Section 10.5 . Once the work has been completed, put the hoods on the sets of contacts
again.
Figure 18 Exchanging the contact arrangements
Betriebsanleitung
[7620] ELP 319
DC013
Copyright (C) Siemens AG 1998
4
A
1 3
A Distance
1 Fastening bolts
2 Movable contact arrangement
3 Wiring
4 Fixed contact arrangement
PZENTW
LANGE_THO
20081022
All Rights Reserved -
Industry Mobility
2 1
A6Z08101637795/EN1/000/B
A25000-X22-Q9-7-7620
Notice no.: 500000097465
31
of
33
0000ZQ6U.doc