Table of Contents
Advertisement
3. The third most common cause of unsatisfactory Abrasive Blaster performance is insufficient CFM flow. CFM = Cubic Feet per
Minute. This is based on compressor output and is listed on all compressor data plates. The greater the CFM output of a
compressor, the better an Abrasive Blaster will perform. Also, a smaller Nozzle I.D. will require less CFM. Generally, a 2mm
Nozzle will require 10 CFM @ 90 psi while a 3.5mm Nozzle will require 20 CFM.
In addition, excessive hose length and an increased number of fittings will reduce available CFM to the Abrasive Blaster.
A larger hose I.D. and shorter length will serve to increase CFM delivery to the Abrasive Blaster.
Generally, if a compressor runs constantly while blasting, it is an indication that it is undersized and a larger capacity unit may be
required. Continuing to run a compressor at that rate can cause overheating and permanent damage.
WARRANTY
This product has a one year warranty covering any manufacturing defects. Despite our strict quality control standards implemented
during our manufacturing process, sometimes a product gets shipped that does not meet our specifications. If you have a product
that does not work correctly within 30 days of your purchase, it can be returned to The Eastwood Company for credit or replacement.
Before returning any product, you must contact the Eastwood Company at 800-345-1178 to acquire a Return Authorization Number.
When sending your product you must include:
1. A copy of the dated receipt showing the original purchase,
2. Your full name, street address and telephone number.
Please ship to:
The Eastwood Company
263 Shoemaker Rd.
Pottstown, PA 19464
ATTN: Warranty Return
We will examine the product. If the problem is due to a manufacturing defect, we will repair or replace the product at no charge and
return to you postage or UPS paid. If the problem is due to misuse, abuse, user modification or it is out of warranty, we will contact
you with a repair estimate and ask for a credit card number for payment. After the product has been repaired, it will be returned via
postage or UPS paid.
14
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Advertisement
Table of Contents
