Changing Web-Based Interface Password - D-Link DAP-1620 User Manual

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual

Changing Web-based Interface Password

On this page, you should change the default user's interface password. To do this, enter a new
password in the User's interface password and Password confirmation fields. You may set
any password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other
characters available in the US keyboard layout.
Figure 38. The page for changing the web-based interface password.
Remember or write down the new user's interface password. In case of losing the new
!
password, you can access the settings of the extender only after restoring the factory
default settings via the hardware RESET button. This procedure wipes out all settings that
you have configured for your extender .
Click the NEXT button to continue or click the BACK button to return to the previous page.
On the next page, check all specified settings.
Also you can save a text file with parameters set by the Wizard to your PC. To do this, click the
SAVE CONFIGURATION FILE button and follow the dialog box appeared.
To finish the Wizard, click the APPLY button. The extender will apply settings and reboot. Click
the BACK button to specify other settings.
6 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
6
Page 46 of 125
Configuring via Web-based Interface