Asus PCI/E-P54NP4 User Manual page 104

Chassis Target Temperature [41ºC]
Configuration options: [32ºC] [35ºC] [38ºC] [41ºC] [44ºC] [47ºC] [50ºC]
Chassis Fan 3 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the
chassis fan speed in rotations per minute (RPM). If the fan is not connected
to the motherboard, the field shows N/A.
Chassis Fan 3 Control [Disabled]
Allows you to enable or disable the chassis fan3 controller.
Configuration options: [Disabled] [Manual Mode]
The following item appears when you set the Chassis Fan 3 Control to
[Manual Mode].
Fan Fix Ratio (%) [50%]
Configuration options: [50%] [60%] [70%] [80%] [90%] [100%]
OPT Fan and Power Fan
OPT_Fan1 Speed
OPT_Fan1 Control
Fan Fix Ratio(%)
OPT_Fan2 Speed
OPT_Fan2 Control
Fan Fix Ratio(%)
OPT_Fan3 Speed
OPT_Fan3 Control
Fan Fix Ratio(%)
Power Fan Speed
The onboard hardware monitor automatically detects the optional fan speed. If the
fan is not connected to the motherboard, the field shows N/A.
OPT_Fan1/2/3 Control [Manual Mode]
Allows you to select the optional fan control mode. When this item is set to
[Manual Mode], you can configure the Fan Fix Ratio % item. If you set this
item to [Enabled], you are allowed to configure the Target Temperature item.
The fan controller detects the temperature of the fan connected to the
OPT_FAN1/2/3 connector and adjusts the fan speed.
Configuraiton options: [Manual Mode] [Enabled]
You need to connect the thermal sensor cables to the OPT_TEMP1/2/3
connectors to enable this function.
4-34
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
[N/A]
[Manual Mode]
[90%]
[N/A]
[Manual Mode]
[90%]
[N/A]
[Manual Mode]
[90%]
[N/A]
Fan configuration
mode setting
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup