Table of Contents
Advertisement
Viewing a COM User Frequency
1.
Press FUNC.
2.
Turn the inner knob to USER FREQS.
3.
Press ENT.
4.
Turn the inner knob to cycle through COM user frequencies.
5.
Press FLIP/FLOP to set the selected frequency as the active frequency.
Press ENT to set the selected frequency as the standby frequency.
Deleting a COM User Frequency
Active
Frequency
1.
Press FUNC.
2.
Turn the inner knob to USER FREQS.
3.
Press ENT.
4.
Turn the inner knob to cycle through COM user frequencies.
5.
Press CLR to delete the selected user frequency.
6.
Press ENT to confirm deleting the selection.
190-01182-01 Rev. E
Deleting User COM Frequencies
Garmin GNC 255A/255B Pilot's Guide
Functions
Position in List
3-3
Advertisement
Table of Contents
