HT-S20R
2-12. SPEAKER BLOCK-2 (SS-S20R)
Note 1: The left side, center and right side of speaker block can be removed using
the same procedure. This explanation uses illustrations from the left side.
soft cloth, etc.
Note 2: When working with the side other than
the bottom side facing downward, lay
a soft cloth, etc. so as not to damage.
2 Lift up the speaker block (left side)
front side
left side
bottom side
Note 4: When connecting the SP cable terminal to the SPK unit,
take care for the direction of the terminal and connect it.
SPK unit
OK
NG
terminal (wide)
[black]
18
Turn the front
side facing up.
in the direction of the arrow.
SPK unit
–
–
terminal (narrow)
[black]
1 Insert a flat-head screwdriver into the gap
of rear panel and grille, and push out the
grille in the direction of the arrow.
Note 3: When using a jig, please work carefully
grille
3 terminal (wide)
[black]
(See Fig. A)
OK
NG
Sony CONFIDENTIAL
For Authorized Servicer
so as not to damage the rear panel.
bottom side
rear panel
left side
top side
4 speaker block
(left side)
3 terminal (narrow)
[black]
(See Fig. A)
SYS SET