Sony MHC-V5 Service Manual page 5

CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistor to both ends of respective capacitors.
• D-AMP board
CN1000 (pin 6 and 10, pin 6 and 3)
• Switching regurator (SWR1)
C202, C203, C403, C407, C531 and C532
– Switching Regurator (Conductor Side) –
800 /2 W
(for C531)
800 /2 W
(for C532)
– D-AMP Board (Conductor Side) –
800 /2 W
(for C403)
800 /2 W
(for C407)
800 /2 W
(for C203)
800 /2 W
(for C202)
CN1000
1 10
800 /2 W 800 /2 W
(pin 3 and 6) (pin 6 and 10)
MHC-V5
5