HT-CT800
Ver. 1.3
2-13. BTW (WIFI) BOARD BLOCK
3 three screws
(BVTP3
left side
front side
left side
BTW (WIFI-2) board
18
8)
4 BTW (WIFI) board block
slot
slot
Pass the coaxial harness
BTW (WIFI-1) board
across the front side of
the screw hole.
Note: This part is deleted from
the midway of production.
guide line
guide line
front side
Pressing the adhesive area.
2 connector (No. 3)
[gray]
bottom cabinet block
Pass the coaxial harness
across the front side of
the screw hole.
Pass the coaxial harness
across the front side of
the screw hole.
cushion (WIFI label)
1 cushion (WIFI label)
2 connector (No. 2)
[white]
[white]: No. 2
[gray]: No. 3
front side
SYS SET