Connecting The Cables; Turning On The Monitor - Asus PA246Q User Manual

2.3

Connecting the cables

1. Connect the cables as the following instructions:
• To connect the power cord: connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
• To connect the VGA/HDMI/DVI/DisplayPort cable:
a. Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor's
VGA/HDMI/DVI/DisplayPort jack.
b. Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your
computer's VGA/HDMI/DVI/DisplayPort jack.
c. Tighten the two screws to secure the VGA/DVI connector.
• To use the earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI or DisplayPort signal is fed.
• To use the USB ports: Plug the smaller end (type B) of the USB upstream
cable to the monitor's USB upstream port, and the larger end (type A) to your
computer's USB port. That will enable the USB ports and card reader on the
monitor to work.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.4

Turning on the monitor

Press the power button
power indicator lights up in white to show that the monitor is ON.
ASUS PA246 Series LCD Monitor
. See page 1-2 for the location of the power button. The
2-3