Table of Contents
Advertisement
2.4
Connecting the cables
Connect the cables as the following instructions:
•
To connect the power cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•
To connect the DVI/DisplayPort/mini DisplayPort/HDMI cable:
a.
Plug one end of the DVI/DisplayPort/mini DisplayPort/HDMI cable to the
monitor's DVI/DisplayPort/mini DisplayPort/HDMI jack.
b.
Connect the other end of the DVI/DisplayPort/mini DisplayPort/HDMI
cable to your computer's DVI/DisplayPort/mini DisplayPort/HDMI jack.
c.
Tighten the two screws to secure the DVI connector.
•
To connect the audio cable: connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
•
To use the earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI/DisplayPort signal is fed.
•
To use the USB 3.2 Gen 1 ports:
»
Upstream: Use the supplied USB Type-B to Type-A cable. Make sure
your computer is installed with the latest Windows 7/Windows 8.1/
Windows 10 operating system. That will enable the USB ports on the
monitor to work.
»
Downstream: Plug the USB Type-A cable of your device to the monitor's
USB Type-A jack.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.5
Turning on the monitor
Press the power button
power indicator
2-4
. See page 1-2 for the location of the power button. The
lights up in white to show that the monitor is ON.
Chapter 2: Setup
Advertisement
Table of Contents
