tams elektronik 70-01035 Manual page 4

English
Required materials
For assembling the kit you need:

an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand

a tip-cleaning sponge

a heat-resistant mat

a small side cutter and wire stripper

as necessary a pair of tweezers and long nose pliers

electronic tin solder, recommended diameter: 0,5 mm

wire, recommended diameters: 0,04 to 0,10 mm² (depending on the
load)
Page 4
Adapter for PluX22-, 21MTC- and SUSI-Interface