Assembling The Kit; Assignment For Plux Adapters (Nem 658/Rcn-122) - tams elektronik 70-01035 Manual

English

7. Assembling the kit

Solder the connecting cables on the top side of the adapter PCB.
Observe the different assignments for PluX and MTC interfaces and the
different mounting versions.
It is recommended to use cables of different colours according to NEM
658 or NEM 660 in order to avoid mistakes when connecting the
adapter PCB.
Caution:
!
Confusing the connections can cause damages at the deocder and/or
at the vehicle. For that reason you should be very attentive when
assigning the connections.

7.1. Assignment for PluX adapters (NEM 658/RCN-122)

Mounting version 1
inserting direction from top
Figure: Top side of the adapter PCB
Assignment for use according to PluX (NEM 658 / RCN-122)
11 = Index-Pin
Page 12
Adapter for PluX22-, 21MTC- and SUSI-Interface
Mounting version 2
inserting direction from bottom