Soldering A Plug For The The Susi Interface - tams elektronik 70-01035 Manual

Adapter for PluX22-, 21MTC- and SUSI-Interface
Pin Name
8 F0f
9 LS/A
10 LS/B
11 Index
12 Vcc
13 AUX3
14 AUX2
15 AUX1
16 V+
17 AUX5
18 Motor2
19 Motor1
20 GND
21 rails left rails left in forward direction of motion black
22 rails
right

7.3. Soldering a plug for the the SUSI interface

As needed you can solder an additional plug for the SUSI interface to
the PCB (not with mounting versions 2). Solder the plug with its four
pins to the four connecting pads in the middle of the PCB and the
solder points at the housing to the two connecting pads at the PCB´s
edge.
Hint: When using a decoder with SUSI interface, you should connect
the SUSI module to the decoder´s SUSI interface.
Description MTC adapter
lighting backward direction
loudspeaker connection A
loudspeaker connection B
not in use, coding
internal decoder voltage 1,8 – 5,7 volts
output 3
output 2
output 1
decoder plus, pick-off after rectifier,
connection storage capacitor
output 5
motor connection 2 minus / backwards grey
motor connection 1 plus / forwards
decoder ground, pick-off after rectifier
rails right in forward direction of
motion
English
Cable colour
white
brown
brown
violet
green
blue
orange
red
Page 15