Advertisement
IS118 User Manual
Distribution Date: May 1st, 2021
Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved
This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe
place and make it available upon request to any operator.
Resale of this product must include a copy of this manual.
This manual can be downloaded from
https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is118
Declarations
EU Declaration of Conformity
Adamson Systems Engineering declares that the
products stated below are in conformance with the
relevant fundamental health and safety criteria of the
applicable EC Directive(s), in particular:
Directive 2014/35/EU: Low Voltage Directive
IS118 - 992-0010, 992-0011, 992-0013,
992-5010, 992-5011, 992-5013
Directive 2006/42/EC: Machinery Directive
IS7/IS118 Rigging Frame - 930-0026, 930-5026
Extended Beam - 930-0021, 930-5021
Moving Point Extended Beam - 930-0033, 930-5033
IS7 Micro Frame - 930-0029, 930-5029
Extended Lifting Plates - 932-0043
Line Array H-Clamp - 932-0047
Signed at Port Perry, ON. CA - May 1st, 2021
------------------------------------------------
Brock Adamson (President & CEO)
ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario,
Canada
T: +1 905 982 0520, F: +1 905 982 0609
Email: info@adamsonsystems.com
Website: www.adamsonsystems.com
Advertisement
