PRIOR Flush lines thoroughly to hook-up When installing the Willoughby Industries' Top-4 Overflow Preventer w/ Manual Reset: When installing the Willoughby Industries’ WAW, WAF, or WWF series washfountains or lavatory deck systems: Before step 1 of the installation instructions, ensure that rough-ins are in the correct location�...
Separate all parts from packaging and make sure all parts are accounted for before discarding any packaging material. If any parts are missing, do not attempt to install T4 Overflow Preventer w/ Manual Reset until you obtain the missing parts�...
DO NOT USE ANY OTHER THREAD SEALERS OR THREAD LOCKERS ON THE PLASTIC THREADS. Thread sealers and thread lockers will attack the black plastic parts� If you have any questions, contact Willoughby Industries at: (317) 638-2381� Willoughby Industries, Inc.
Page 11
The check valve may not be functioning properly. 1. Replace check valve with a new one from Willoughby. g. Contact Willoughby Industries for further assistance if you have tried all of the steps listed above and problem persists. Visit our website at http.//www.willoughby-ind.com 2210 West Morris Street •...
Installation & Operation Manual Warranty Willoughby Industries, Inc� warrants to commercial and institutional purchasers only that each unit will be free from defects in workmanship and materials under normal use and service upon the following terms and conditions� The period during which components are warranted is as follows: 1�...
Need help?
Do you have a question about the T4 and is the answer not in the manual?
Questions and answers