Sony NEX-FS700 Service Manual page 46

3-1. ASSEMBLY
Assembly-1: Installation Cautions of the Cabinet (R (Front))
Section.
Raise the ND Change Lever one step
from the bottom to the 1/4ND position.
ND Change Lever
1/4ND
ND Select Switch
Cabinet (R (Front))
Section
Set the ND Select Switch to the
1/4ND position.
Assembly-2: Installation Cautions of the AU Cover.
Route the harness (Coaxial Cable)
as shown.
AU Cover
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/FS700EK/FS700J/FS700JK/FS700R/FS700RH/FS700U/FS700UK
Assembly-3: Installation Cautions of the Coaxial Harness.
Route the coaxial harness as shown.
Flexible Clamp
(Rear)
Coaxial Harness
Assembly-4: Putting position of the IM Adjust Washer (A).
Adjust IM
Washer (A)
Adjust IM Washer (A) Adjust IM Washer (A)
3. ASSEMBLY
Assembly-5: Attaching method of the CM Radiation Sheets.
Attach the three CM Radiation Sheets to a plate.
1
CM Radiation CM Radiation
Sheet (Ist) Sheet (2nd)
Plate Plate
Peel off the three CM Radiation Sheets from a plate.
2
Three CM Radiation
Sheets
Plate
Three CM Radiation Sheet
Attach the three CM Radiation Sheets to the Imager
3
Unit and MT Heat Sink.
Three CM
Radiation
Three CM Radiation
Sheets
Sheets
Attach the three CM Radiation Sheets (4th).
4
CM Radiation
Sheet (4th)
CM Radiation
Three CM Radiation
Sheet (4th)
Sheet
3-1
Assembly-6: Apply grease on the MB N Plate SP.
CM Radiation
Sheet (3rd)
Plate
G G-85
(J-6082-626-A)
Assembly-7: Apply grease on the LCD Lock Bolt.
LCD Lock Bolt
Imager Unit
G G-85
(J-6082-626-A)
MT Heat Sink
MT Heat Sink
MB N Plate SP
Screwing position