Assembly - Breville FoodCycler LWR550 Instruction Book

Filter Air Guides
Two small air guide covers sit on top of
the carbon filters, ensuring that the air and
water vapour is properly directed toward the
FoodCycler vents.
Locking Lid
Seamless design, slides and locks smoothly
into place prior to every cycle to help insulate
sound, reduce odours, and ensuring a safe,
reliable cycle. Removing the lid will pause
operation.
Each one of these parts forms the complete
FoodCycler system.
10
a

Assembly

BEFORE FIRST USE
w
IMPORTANT
Ensure all packaging is removed from the
FoodCycler, EcoFilters and filter air guides
before using.
• Remove and safely discard any packaging
material or promotional labels attached to
your FoodCycler.
• Remove the stickers located on the top of the
two activated carbon EcoFilters that come
fitted in the FoodCycler and ensure that the
filters and filter air guides are in place before
first use.
• Follow the direction found in Replacing the
Filters on page 14.
w
IMPORTANT
Failure to remove the stickers located at the
top of each of the filters before first use may
impede air flow and cause the FoodCycler to
fail to operate properly.
• Select a flat, level and dry location for the
FoodCycler.
• For proper air flow, locate the FoodCycler at
least 20cm from any wall or furniture.
• Ensure the air inlet and outlets are not
blocked before use.
n
NOTE
When moving the FoodCycler, always lift using
two hands under the base and set down gently
on a flat, level and dry surface.