Cleaning The Wine Cabinet; Power Failure; Vacation Time - BORETTI BPWKN 60 Instructions Manual

* When the door is open to 90°, take out 2 screws (2) from lower door axis
(3), remove the door (4), then pull out the door and door axis. (Fig. A)
* Put the door (4) down safely and take out the plug (12) from top of
door frame, unscrew one screw (11) at bottom and remove the door
limit device (10), then install the door limit device (10) at top of door
frame, please use spare plug (12) to block the hole at top of door
frame. (Fig. A/B)
* Remove decorative nail (6) from the right top hinge (5) and remove it. (Fig. C)
* Remove the decorative nail (8) from the left top of cabinet and install the
spare left top hinge (7) at left top of cabinet with three screws. (Fig. D)
* According above procedure, install the spare left lower hinge (9). (Fig. E)
* The door revolves 180°, install the door in same way it was removed and
fix it with door aligned.
* Block the hole at right top of cabinet with spare decorative nail (8).

Cleaning the wine cabinet

* Turn off the power, unplug the appliance, and remove all items
including shelves and rack.
* Wash the inside surfaces with a warm water and baking soda
solution. The proportion should be about 2 tablespoons of baking
soda to a quart of water.
* Wash the shelves with a mild detergent solution.
* Wring excess water out of the sponge or cloth when cleaning area of
the controls, or any electrical parts.
* Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.

Power failure

Most power failures are corrected within a few hours and should not
affect the temperature of your appliance if you minimize the number
of times the door is opened. If the power is going to be off for a longer
period of time, you need to take the proper steps to protect your contents.

Vacation time

44