Changing Door Opening Side - BORETTI BPWKN 60 Instructions Manual

Changing door opening side

For the BPWKN
This appliance has reversible doors but is delivered with a right hinged
door. The left hand hinge kit comes with the unit (in the box), should you
wish to reverse the hinge on your unit.
For your safety, please unplug appliance before doing this operation.
* Incline the wine cabinet with 45°, take out right lower hinge's screws
with screwdriver. (Fig. 1)
* Lift the cellar and unscrew the upper right hinge with a screwdriver
and pull out the door, secure it, put the door down safely and remove
the screws, then remove the hinge, place it and screw it on the other
side, unscrew the magnet located at the bottom and center of the
frame to install it on the top position of the frame. Finally turn the
door 180°. (Fig. 2/3/4)
* Take off the decorated nail from left upper side then fit the door with
screws then fit the decorated nail to right side of A location. (Fig. 5/6)
60 88
/ BPWKN
42