Asus B1A Hardware Reference Manual page 85

Fingerprint Authentication System (cont')
Authentication Setup Menu
Preboot Authentication, V5.018 RIO V2.3 AES4000
Add new user Erase all information
add Fingerprint List users
Delete user delete fingerPrint
Use arrow keys to highlight a menu item, see detailed description below
With the desired option highlighted press <Enter>
...or press one of the capitalized shortcut keys to select item directly
This screen is shown when you enter the authenti-
cation setup. Highlight an item with the cursor or
enter one of the capitalized letters.
Add Fingerprint
Preboot Authentication, V5.018 RIO V2.3 AES4000
+ User 1
User 2
Add fingerprints: Use the arrow keys to select a User
When the name is highlighted, press <Enter>
This screen allows you to add fingerprints. Select a
user with the keyboard cursor, press <Enter>, and then
follow the instructions for enrolling a new fingerprint.
A white "+" will represent the finger to be enrolled
and successful enrollment will turn the "+" red.
Change admin. status
change Security level
eXit
This screen allows you to add a new user. After entering
the user name, you have to enroll at least one finger-
print. There must be no more than two fingerprints reg-
istered because the authentication memory only allows
three fingerprints total. So you can have 1 fingerprint
for each of the 3 users, or 3 fingerprints for 1 user.
+
This screen allows you to delete a user, select the item
on the main menu and select the user with the arrow
keys. Press <Enter> and a confirmation will be asked.
Appendix
Add New User
Preboot Authentication, V5.018 RIO V2.3 AES4000
User name?
_
Delete a User
Preboot Authentication, V5.018 RIO V2.3 AES4000
+ User 1
User 2
+
Delete a User: Highlight with arrow keys
When selected, press <Enter>
A
+
85