Kia Soul 2020 Owner's Manual page 129

Safety features of your vehicle
Installing a Child Restraint System
with a lap/shoulder belt
To install a Child Restraint System
on the rear seats, do the following:
1. Place the Child Restraint System
on a rear seat and route the lap/
shoulder belt around or through
the Child Restraint System, follow-
ing the Child Restraint System
manufacturer's instructions.
Make sure the seat belt webbing
is not twisted.
3 42
E2MS103005
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis-
tinct "click" sound. Position the
release button so that it is easy to
access in case of an emergency.
OEN036101
3. Remove as much slack from the
belt as possible by pushing down
on the Child Restraint System
whilst feeding the shoulder belt
back into the retractor.
4. Push and pull on the Child Restraint
System to confirm that the seat belt
is holding it firmly in place.
If your Child Restraint System manu-
facturer recommends the use of a
top-tether with the lap/shoulder belt.
To remove the Child Restraint
System, press the release button on
the buckle and then pull the
lap/shoulder belt out of the Child
Restraint System and allow the seat
belt to retract fully.
OEN036104