Fastech Ezi-SPEED ESD-30-C Manual page 74

Warning record and
reset
Operation data number
I/O status
• Display of the rotation speed
- Displayed digit number when setting the speed reduction ratio or speed increasing ratio
Since the number of significants figures for the integer part is changed if the speed reduction
ratio or speed increasing ratio is set, the digit number displayed on the panel will also be
changed.
Setting value for the speed reduction ratio
and speed increasing ratio
1.00 ~ 9.99
10.00 ~ 99.99
100.0 ~ 999.9
1000 ~ more
Display warning record. You can check and reset warning
Wn.rc
record
oP.d- Monitors the operation data number currently selected.
You can check the ON/OFF status of the I.O signal of drive.
If the signal is ON, the corresponding digit is lit. if the
signal is OFF, the digit is unlit.
Input signal
io
Output signal
-74-
Display on the monitor mode
0 ~ 9999
0.0 ~ 999.9
0.00 ~ 99.99
0.000 ~ 9.999