Junction Box - Omnisense Systems Ulysses micro User Manual

5.5.8 Junction Box

In this section, you can view the Junction Box serial number and IP address. You can change
the Junction Box's IP address and set the NMEA baud rate.
Junction Box Serial No. :
IP Address :
NMEA Baud Rate :
Junction Box Serial No
You can view the serial number and the IP address of the Junction Box. To access other
Junction Boxes that may have been connected to the system, use the
through other Junction Box (if connected).
The enabled/disabled the camera to acquire the radar track coordinates on the selected
Junction Box.
IP Address
The current IP Address is displayed here. If you need to change the IP address of the Junction
Box to prevent IP conflict within the network, enter a new set of IP address and click [Set].
NMEA Baud Rate
You can set the NMEA baud rate to either 4800, 9600, 19200 or 38400 to complement your
existing electronic navigational equipment such as your radar, GPS and/or AIS.
CONTROLLER JUNCTION BOX
00190046
10 . 10 . 225 . 220
4800 9600
19200
40
NMEA
Set
38400
arrow to scroll