Installing The Junction Box - Omnisense Systems Ulysses micro User Manual

3.4 Installing the Junction Box

The Junction Box is the main interface that handles communication between the components. It
also distributes the power supply to the Camera Turret and the Joystick Controller.
The Junction Box consists of the housing base, a see-through polycarbonate cover and it is
secured by two M5 studs on each side of the box. To access the internal sockets, remove the
retaining fasteners and the polycarbonate cover.
Create necessary openings for cables on the weather rubber seal found at the cable seat.
Once cabling connections are completed, replace the polycarbonate Junction Box cover.
Cables can be further secured to the cable seat by the cable ties provided.
Please note that the Junction Box is not weatherproof and should be installed in an area
protected from the elements.
We recommend installing the Junction Box onto a bulkhead with a cable outlet facing down
and within practical connecting distance to the displays/MFDs.
Screws
11
Detachable Cover
Housing Base