Device Access - Omnisense Systems Ulysses micro User Manual

5.5.2 Device Access

In this section, you can change the default password and IP address for the camera system.
Password :
IP Address :
How to change the password
1. Select on the password field (default password is 12345).
2. Enter your preferred password and click/tap anywhere on the screen.
3. Select [OK] on the dialog box to save your new password.
How to change the IP address
The IP address is set to pair with a Garmin's MFD by default. If you are using Furuno or Navico's
MFD, you can set the IP address automatically to pair with one of the supported brands using
the preset button.
To change the IP address for either Furuno, Garmin or Navico's MFDs:
1. Select on either [Furono], [Garmin] or [Navico] button to generate a set of IP address.
2. Select [Save & Reboot]. Select [OK] on the dialog box to confirm.
3. The camera will be paired with your MFD after the reboot.
Changing the IP address manually
If there is a conflicting IP address with other connected devices within the network, you can
change the camera's IP address manually (see Network Setup 5.5.3).
10 . 10 . 100 . 125
Furuno Garmin
Network Setup
30
Navico
Save & Reboot