Advertisement
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3-4
Punch, Die, and Drawstud Selection .............................. 5
Description
Greenlee punches are cutting tools for punching holes
in a variety of materials and material thicknesses. These
punches are intended to be used with Greenlee dies,
drawstuds, and knockout drivers.
These punches are designed to be used with the
following Greenlee tools:
• Intelli-PUNCH™ Battery-Hydraulic Knockout Driver
• LS50L2 Battery-Hydraulic Knockout Driver
• Quick Draw
®
Hydraulic Drivers
• 746A Hydraulic Driver
Standard and Slug-Buster punches can punch holes
through mild steel, brass, copper, aluminum, fiberglass,
and plastics, with limited stainless steel capability.
Do not exceed the rated capacity of the punch.
Driver and punch capacity ratings can differ. Ensure
your hydraulic driver meets capacity ratings before
attempting to punch a hole.
Greenlee Tools, Inc.
1.800.561.8187
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on tools provide information for avoiding
hazards and unsafe practices related to the use of the
tools. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Quick Draw and Slug-Buster are registered trademarks of
Greenlee Tools, Inc.
KEEP THIS MANUAL
2
www.
.com
Punches for Hydraulic Tool Use
Punches for Hydraulic Tool Use
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
information@itm.com
Advertisement
