Advertisement
Operating and Maintenance Manual
GETTING STARTED
If supplied for a 120V system, plug into a 120V - 15 Amp outlet. If supplied for a 230V system -
plug into a 230V outlet.
For best results situate your unit close to your sitting, sleeping or work area.
We recommend running your unit on low, unless in a high dust environment. The low setting also
provides the most efficient odor filtration.
BEFORE REMOVING THE TOP OR BOTTOM OF THE UNIT FOR ANY REASON, ALWAYS
WARNING!
UNPLUG THE CORD FROM THE POWER SUPPLY.
AIRMEDIC MAINTENANCE
The HEPA Filter
Change the HEPA filter every 3 - 5 years or after a noticeable decrease in air quality.
The Pre-Filter
Change or vacuum the pre-filter every 2 - 4 months depending on the dust level in the area of use.
The Carbon Filter
Change the carbon filter after 2 years or after a noticeable decrease in air quality.
Note: White and sandstone units
have white pre-filters, black units
have black pre-filters.
·
2
AllerAir
1.888.852.8247 · info@allerair.com
REPLACEMENT PARTS
Models
N6FMPW001
N6FMPB002
N6FH0411
A5FMR002
AM000911
AM000912
CMEL0046
A4EL0045
A4EL9008
Pre-filters
White pre-filter
Black pre-filter
HEPA filter
Mircro particulate filter
Bulk Exec carbon mix
Bulk Vocarb carbon mix
Switch
8'-6" black cord
Control knob
Notes
Packs of 4
Packs of 4
1 filter
Pack of 1
44 lb. box
44 lb. box
1
1
1
Advertisement
