Advertisement
Operating and Maintenance Manual
GETTING STARTED
Keep packaging in case of warranty returns
Wipe the unit with a soft damp cloth to remove any dust which may have accumulated
during shipping
Check the inlet opening for extra prefilters if ordered. (Bottom of unit)
Place the unit on its casters and plug it into a 120-volt outlet with ground
Run the unit on TURBO for a few minutes to re-adjust the airflow patterns in the room
Depending on your interior conditions, you may choose to run the unit on HIGH during
the day and on LOW at night*
Running the unit on LOW is energy-efficient and increases the amount of air dwell time
in the cleansing chambers
*Depending on interior dust conditions. For VOC's, chemicals, smoke or odors we suggest operating continuosly on the
low setting to allow for the longest dwell time and adsorbtion.
REPLACING OR CLEANING THE PRE-FILTER
We recommend changing or cleaning pre-filters every one to two months.
STEP 1
Turn the unit off, unplug it,
and gently lay it on its
side.
WARNING!
REFRAIN FROM POKING OR STICKING ANY OBJECT INTO THE UNIT'S AIR VENT DISCHARGE.
PRE-FILTER ORDER REFERENCE NUMBERS*
To order a new pre-filter, call AllerAir toll-free at 1-888-852-8247 during regular business hours (EST), or
send an e-mail to info@allerair.com
Models
Prefilters
Exec, Vocarb
Poly Prefilters
DS Models
Tacky Prefilters
MCS Models
Cotton Prefilters
*Please use the above part numbers when ordering your replacement parts.
·
2
AllerAir
1.888.852.8247 · info@allerair.com
STEP 2
Slowly remove the dirty pre-filter to avoid
dispersing its contents.
To clean:
Carefully vacuum both sides of
the filter.
To discard:
Gently insert into a plastic bag
and discard.
4000
A4FMP006
A4FMPS06
A4FCP016
STEP 3
To install:
pre-filter flat against the inner
walls of the innermost filter.
Return the unit to an upright
position.
5000
6000
A5FMP009
A6FMP012
A5FMPS09
A6FMPS12
A5FCP019
A6FCP022
Gently press the
Notes
packs of 4 or 8
packs of 10
packs of 6
Advertisement
