Advertisement
Operating and Maintenance Manual
FILTER ASSEMBLY - AirMedic+ D
D models have a 3" deep carbon filter.
STEP 1
Turn power off and
unplug from receptacle.
Lay unit upside down.
STEP 4
Remove only one of the white,
donut-shaped gaskets from
the inside of the purifier body.
STEP 7
Place lid back to its proper
position by aligning the arrow
with the rear seam.
DO NOT ALLOW ANY OBJECT TO BE STUCK OR POKED INTO ANY OPENING OF THE UNIT.
WARNING!
NEVER SERVICE THE UNIT BEFORE TURNING UNIT OFF AND REMOVING ELECTRICAL PLUG
FROM THE WALL RECEPTACLE.
·
4
AllerAir
1.888.852.8247 · info@allerair.com
STEP 2
With a #2 Philips screwdriver,
remove the four screws from the
bottom of the unit.
STEP 5
Insert the carbon filter.
STEP 8
Replace the four screws.
STEP 3
Gently grasp wheels. Remove the
base by pulling gently on the wheels.
STEP 6
Replace the gasket that had
been removed in STEP 4.
STEP 9
Turn the unit back onto its
wheels. It is now ready for
immediate use.
Advertisement
