Function Operation
Energy switch: You can set saving function through the button
Temperature maximum setting: You can turn up or down the maximum temperature through operating
, you will see a pop window what you can choose "apply to all" or "apply to one group". Default is "apply to all".
Temperatureminimum setting: same as above.
Temperature auto reset: You can set the function through the button
to set standard temperature and then reset time.
Password
As picture 5
Password setting: You can choose
User selection: Choose user level, normal or advanced. It will show
into effect when you leave this page. Otherwise it will remind "update password fail".
Remark: default password is 12345.
Picture 4
Picture 5
to decide if password is necessary.
. Default is "ON".
. Only when you choose "ON", will you operate
or
. After setting, Click
or