Advertisement
Function Operation
is the All on/All off button. If it is displaying all indoor units, then the All on/All off button is used to control all indoor units; if it
is displaying the indoor units of one group, then the All on/All off button is used to control the indoor units in this group.
Each grid represents an indoor unit in the air-conditioner display area, and each page can display 10 indoor units. Slide around the
screen to turn pages on the screen.Indoor unit is shown as picture 4.
Record: The colors of upper part of the icon represents the operation modes, different mode uses different color to distinguish from
each other.
Heating Mode--orange;Cooling Mode--blue; Dry mode--aqua;
Fan mode--wathet;Intelligent Mode--wathet.
Press single air-conditioner icon to enter the air-conditioner setting interface, as shown in picture5
Setting interface:
Temperature setting: By sliding up/down the temperature selection area, you can change the setting temperature. It can be changed by
pressing arrow
/
too, press once to adjust it one time.
Record: In wind mode, the temperature will be gray and can't be changed.
Set Mode: Press the corresponding mode icon, the setting is successful if the icon is lighted up. Only one mode can be chosen.
Set Wind Speed: Press the corresponding wind speed icon, the setting is successful if the icon is lighted up. Only one wind speed can
be chosen.
Record: If you choose the fan mode, you can't choose the automatic wind speed any more.
Interface board face
Set temperature
Mode display
Indoor unit address
Wind speed display
Picture 4
Picture 5
Hide quick links:
Advertisement
