Rainbow Colour Changers PRO Series Short Reference page 7

Load the colour string (overall view):
Step Key/Sequence
If the length of the gel string is incorrect, the scroller will show a wrong quantity of calculated colour frames. You will find the correct
measurements of the single colour frames for each PRO Colour Changer on page 2.
E-mail: info@rainbow-colour-changers.de
Action
Press
Insert the gel string
Press
Press
Gel string at the end position:Tension
the roll and fix the gel string
Press
Press
End of pre-calibration
Press
End of pre-run
End of calibration
Press (if the calculated number of
colour frames is wrong)
Press (if the calculated number of
colour frames is wrong)
Press
R a i n b o w C o l o u r C h a n g e r s G m b H
An der Talle 26-28
Tel: +49 5251 14092 28
Display
(?- for individual value)
D-33102 Paderborn
Fax: +49 5251 14092 90
Homepage: www.rainbow-colour-changers.de
Display/Action
Alternating
General adjustment of the not loaded
Scroller
Scroller is running to the start position
When arriving at the start position
Gel string runs forward
Gel string runs back
Flashing
Running of the pre-calibration
Counts pre-run 1-15 (F)
Early interruption of the pre-runs
(possible from the 6. pre-run)
Running of the calibration
Number of the colour frames
Reduces the amount of colours
(max. 2 possible)
Raises the amount of colours
(max. 2 possible)
Confirm
Start address
End of the loading procedure
7