Rainbow Colour Changers PRO Series Short Reference page 4

Scroll load and power up the Scroller
Loading the gel string:
The gel string has to be cut exactly to the measurements for the
scroller for proper operation. The delivered Gel Attachment Pins
should be fixed at the beginning and the end.
The heat resistant tape for connecting the single colour frames has to be on the side which turns away from the luminaire. The Colour Changer
should be placed opened (see „Opening the scroller"), with the display facing you. Connect the scroller with the power supply and switch it on.
Step Key/Sequence
Lay down the gel string on the right hand side of the scroller, so that the
string is aligned between the flanges of the right roll. Please note that the
colour string is running between the leaders at the side of the rolls. Turn
the left roll until the slot faces upwards.
E-mail: info@rainbow-colour-changers.de
Action
Turn on the power
Press
Insert the colour
string
R a i n b o w C o l o u r C h a n g e r s G m b H
An der Talle 26-28
Tel: +49 5251 14092 28
Display
(?- for individual value)
Actual software-version (example)
Alternating with the number of frames
Scroller drives to the home position
D-33102 Paderborn
Fax: +49 5251 14092 90
Homepage: www.rainbow-colour-changers.de
Display/Action
Type of the unit (example)
When it is at its home position
4