Rainbow Colour Changers PRO Series Short Reference page 6

Depending on the number of single frames, you have to tension the right roll:
For 6", 8" and 12" PRO Colour Changer:
2 – 21 colours = 6 full turns
21 – 25 colours = 7 full turns (for the 12" PRO)
21 – 33 colours = 7 full turns
For 15" and 8-Lite PRO Colour Changer:
11 – 16 colours = 18 full turns
17 – 20 colours = 20 full turns
21 – 25 colours = 20 full turns
Tension the right roll by turning it anti-clock-wise. After the correct quantity of full turns hold the roll (the slot has to face up) and fix the
colour string by attaching the gel attachment pin into the slot of the right roll. Release the roll carefully and check with the help of rolling
forward and back with the following keys
resistant tape.
The automatic pre-calibration and the pre-run of the colour string follows at this point. This is necessary for a precise rolling-up, because the
Colour Changer automatically calculates the number of colour frames.
Step Key/Sequence
E-mail: info@rainbow-colour-changers.de
the correct guide of the colour string. Now fix the edges of the gel string with the heat
Action
Press
Press
End of pre-calibration
Press
End of pre-run
End of calibration
Press (if the calculated number of
colour frames is wrong)
Press (if the calculated number of
colour frames is wrong)
Press
R a i n b o w C o l o u r C h a n g e r s G m b H
An der Talle 26-28
Tel: +49 5251 14092 28
Display
(?- for individual value)
D-33102 Paderborn
Fax: +49 5251 14092 90
Homepage: www.rainbow-colour-changers.de
Display/Action
Flashing
Pre-calibration is running
Counts pre-run 1-15 (F)
Early interruption of the pre-runs
(possible from the 6. pre-run)
Calibration is running
Amount of the colour frames
Reduces the amount of colours
(max. 2 possible)
Raises the amount of colours
(max. 2 possible)
Confirm
Level display of the colour channel
Start address
End of the loading procedure
6