A R T Tube Channel Specifications - Art Tube Channel User Manual

A R T Tube Channel Specifications

Dimensions
Weight
Maximum Gain
XLR to XLR
¼" to ¼"
Phantom Power
Compression Ratio
Attack Time
Release Time
EQ Frequency Bands:
Low Shelf:
High Shelf:
Low-Mid Sweepable:
High-Mid Sweepable:
"Q"
Gain/Frequency Band:
Equivalent Input Noise
Dynamic Range
Impedance
Output Impedance
Maximum Input Level
Maximum Output Level
CMRR
THD
Tubes
Power Requirements
A R T retains a policy of constant product improvement. A R T reserves the
right to make changes in design or make additions to or improvements upon
this product without any obligation to install the same on products previously
manufactured. In other words, specifications are subject to change without
notice.
Designed and manufactured in the United States of America.
Applied Research and Technology, Inc.
22
5.25"D x 19"W x 1.65"H
8.0 lb.
81dB
63dB
+48v DC (switchable)
2.3:1 (comp)/ 6:1 (lim)
6.5ms
200ms (fast), 70ms-1sec (auto)
40Hz/120Hz Selectable
6KHz/18KHz Selectable
20Hz to 200Hz/ 200Hz to 2KHz
200Hz to 2KHz/ 2KHz to 20KHz
1.1
+/- 12dB
-129dBu (XLR to XLR, 'A' wghtd)
>90dB (no weighting)Input
1.67k ohms (XLR), 1M ohm (¼")
600 ohms (XLR), 300 ohms (¼")
+15dBu (XLR), +21dBu (¼")
+27dBu (XLR), +22dBu (¼")
90dB (typical)
<0.1% (typical)
Two Hand-Selected Tubes
(12AX7A/12AT7)
100-125 VAC, 25W (Export units
configured for country of
destination)
(716) 436-2720 (Phone)