Task Force Tips Typhoon Series Instructions For Installation, Safe Operation And Maintenance page 2

The following documents contain supporting safety and operating information
MANUAL: Remote Control (RC)
Monitor Electrical Controls
Supplemental Instructions for use with RC Monitor Manual
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
Understand manual before use. Operation of this device without understanding the manual and
DANGER
receiving proper training is a misuse of this equipment. Obtain safety information at www.tft.
com/serial-number
SECTION 3.0 SECTION 4.9
Toggle Switch Monitor
Operator Station
SECTION 4.0
(Y4E-TS)
Electrical Controls Installation and Operation
SECTION 4.10
SECTION 4.1
Monitor Communication
Monitor Mounted
Interface Control
Operator Station (Y4E-COMM)
SECTION 4.2 SECTION 4.11
Panel Mount Monitor Position Display
Operator Station (Y4E-DISP)
(Y4E-RP)
SECTION 4.12
SECTION 4.3
Remote Auxiliary Function
Panel Mount With Display
Interface Control
Operator Station
(YE-REMAUX)
(Y4E-RP-D)
SECTION 4.4 SECTION 4.13
Tethered Electric RC Monitor Aerial
Operator Station Truck Installation
(Y4E-CT-##)
SECTION 4.14
SECTION 4.5
Multiplex Interface Control (YE-CAN#)
Tethered Operator Station
With Display
(Y4E-CT-##-D)
SECTION 4.15
Ethernet Interface Control
SECTION 4.6
Wireless
Operator Station
(YE-RF-##)
SECTION 4.16
Electric Nozzle Actuator
SECTION 4.7
Wireless Operator Station
With Display
SECTION 4.17
(YE-RF-##-D)
Valve Kits
(YE-VK-PH)
SECTION 4.8
Joystick
Operator Station SECTION 5.0
(Y4E-JS)
Troubleshooting
TASK FORCE TIPS LLC 3701 Innovation Way, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
MADE IN USA • tft.com
©Copyright Task Force Tips LLC 2008-2019
LIY-500 - Remote Control (RC)
Monitor Electrical Controls
MANUAL: HYDRANT UNDER
MONITOR (HUM)
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
Understand manual before use. Operation of this device without understanding the manual
WARNING
and receiving proper training is a misuse of this equipment. Obtain safety information at
www.tft.com/serial-number
This Instruction Manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and
safety procedures associated with the Hydrant Under Monitor (HUM).
This Instruction Manual should be kept available to all operating and maintenance personnel.
RATED OPERATING PRESSURE: 300 psi (21 bar) HYDROSTATIC PROOF TEST: 1200 psi (83 bar)**
SAFE OPERATING RANGE FOR MONITOR OUTLET: **Do not exceed the rated operating pressure of 300 psi (21
bar). The hydrostatic proof test is performed on a sample valve
Up to 2500 gpm below 130 psi (9500 l/min @ 9 bar)*
to ensure it does not visibly rupture, crack or permanently distort
Up to 2000 gpm below 200 psi (8000 l/min @ 14 bar)*
at 4 times the rated operating pressure. The purpose of the proof
Up to 1600 gpm @ 300 psi maximum (6000 l/min @ 21 bar)*
test is to be confi dent the valve design may be safely operated
* valid for monitor outlets up to 20" (508mm) tall from the HUM
at the rated operating pressure.
outlet. Read section 4.3 for details.
SAMPLE CONFIGURATIONS
Model ZBAD31X00
with 4" ANSI 150 on side B,
6" Storz on port C1
and blind plug on port C2
Model ZBAD38J8J Model ZBAD11T1T
with 4" ANSI 150 on side B with integrated TFT Typhoon on side B
and 2.5" gated wyes on and 5" Storz on both ports C1 and C2
both ports C1 and C2
TASK FORCE TIPS, INC. 3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
MADE IN USA • www.tft.com
©Copyright Task Force Tips, Inc. 2013-2017
LIZ-055 - Hydrant Under
Monitor (HUM)
©Copyright Task Force Tips LLC 2004-2020
PERSONAL RESPONSIBILITY CODE
The member companies of FEMSA that provide emergency response
equipment and services want responders to know and understand the
following:
1. Firefighting and Emergency Response are inherently dangerous activities
requiring proper training in their hazards and the use of extreme caution
at all times.
2. It is your responsibility to read and understand any user's instructions,
including purpose and limitations, provided with any piece of equipment
you may be called upon to use.
3. It is your responsibility to know that you have been properly trained in
Firefighting and /or Emergency Response and in the use, precautions, and
care of any equipment you may be called upon to use.
4. It is your responsibility to be in proper physical condition and to maintain
the personal skill level required to operate any equipment you may be
called upon to use.
5. It is your responsibility to know that your equipment is in operable
condition and has been maintained in accordance with the manufacturer's
instructions.
6. Failure to follow these guidelines may result in death, burns or other
severe injury.
Fire and Emergency Manufacturers and Service Association
FEMSA
SUPPORTING MATERIALS
pertaining to the equipment described in this manual.
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
WARNING
This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and safety
procedures associated with the Valve Under Monitor or Valve Under Monitor RC.
This manual should be kept available to all operating and maintenance personnel.
SAFE OPERATING RANGE:
Up to 2500 gpm below 130 psi *
Up to 2000 gpm below 200 psi *
Up to 1500 gpm @ 300 psi maximum*
TASK FORCE TIPS LLC
LIY-500 April 8, 2019 Rev14
©Copyright Task Force Tips LLC 2009-2018
LIA-285 - Valve Under Monitor
(VUM) Valve Under Monitor
Remote Control (VUM RC)
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
DANGER
To make the Extend-A-Gun as versatile as
p s o b i s e l
Each kit has a different upper bracket, the lower
bracket is the same in all three.
Model ZBAD01T1T
with integrated Booster,
TFT Monsoon on side B and
5" Storz on both ports C1 and C2
TASK FORCE TIPS, INC.
LIZ-055 July 25, 2017 Rev03 ©Copyright Task Force Tips, Inc. 2002-2011
LIX-512 - Extend-A-Gun Model
DANGER
P.O. Box 147, Lynnfield, MA 01940 • www.FEMSA.org
MANUAL: Valve Under Monitor (VUM)
Valve Under Monitor Remote Control
(VUM RC)
Understand manual before use. Operation of this device without understanding the manual and
receiving proper training is a misuse of this equipment. Obtain safety information at www.tft.
com/serial-number
VUM RC six seconds from open to close
Meets NFPA 1901 slow close requirement
(9500 l/min @ 9 bar)
Hydrostatic Proof Test:
(8000 l/min @ 14 bar) 900 psi (62bar)
(6000 l/min @ 21 bar)
*
valid for monitor outlets up to 17" (432mm) tall from the VUM outlet. Read section 4.3 for details.
SAMPLE CONFIGURATIONS
VUM with 4.5" Quick Connect VUM RC with 2.5" Quick Connect
and 2.5" Gated Elbow
AKE1T1111D
AKM1Q1113D
VUM RC with CODE-RPM outlet VUM with 22.5° CODE-RPM outlet VUM with 4" ANSI 150 outlet
and 2.5" Gated Elbow and Parralel Shaft Gearbox and 2.5" Straight Valve
AKE111113D AKP121111D AKM131114D
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
MADE IN USA • tft.com
LIA-285 July 25 2018 Rev08
MANUAL: EXTEND-A-GUN
MODEL XG12
Telescoping Waterway for Deck Mounted Monitors
Read instruction manual before use. Operation of this device without understanding the manual
and receiving proper training is a misuse of this equipment. A person who has not read and
understood all operating and safety instructions, is not qualifi ed to operate the Extend-A-Gun
telescoping unit.
r h t e e m u o i t n g n r b c a e k k t s t i a e r o e f f e r . d
SHOWN WITH
TFT MASTER NOZZLE
AND CROSSFIRE DECK GUN
XGB-13 TUBE/SADDLE
BRACKET SET
3" NPT
XGB-23 PLATE/SADDLE
BRACKET SET
ALTERNATE:
1) MOUNTING PLATE, 9" SQ.
TFT PART XGB-23
2) SADDLE BRACKET
TFT PART XGB-33
XGB-33 SADDLE/SADDLE
BRACKET SET
** - OUTLETS SHOWN ARE
FOR MODELS XG12PL - XL & XG12-VL-XL
FOR MODELS WITH 3" MAKE NPT OUTLET, ADD 1"
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
MADE IN USA • www.tft.com
LIX-512 July 25, 2011 Rev08
XG12
2
MANUAL: IVUM and IVUM RC
4" INDUSTRIAL VALVE UNDER MONITOR
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
Understand manual before use. Operation of this device without understanding the manual and
WARNING
receiving proper training is a misuse of this equipment. Obtain safety
information at www.tft.com/serial-number
S A F E O P E R A T N I G R A N G : E H Y D R O S T A T C I P R O O F T E S : T
1200 psi (83 bar)**
Up to 2500 gpm below 130 psi* (9500 l/min @ 9 bar) **Do not exceed the rated operating pressure of 300
Up to 2000 gpm below 200 psi* (8000 l/min @ 14 bar) psi (21 bar). The hydrostatic proof test is performed
on a sample valve to ensure it does not visibly
Up to 1600 gpm @ 300 psi maximum* (6000 l/min @ 21 bar)
rupture, crack or permanently distort at 4 times
*these maximum fl ow rates and nozzle inlet pressures are valid for monitor the rated operating pressure. The purpose of the
outlets up to 18.6" (472mm) tall from the IVUM outlet. Read section 4.2 for proof test is to be confi dent the valve design may
details. be safely operated at the rated operating pressure.
model ZAAZ3 or ZASZ3
with 4" ANSI 150 outlet
(shown from gearbox side)
model ZAAZT-RC or ZASZT-RC model ZAAZX or ZASZX
with 2.5" NH quick connect for Tornado for integrated TFT monitor
monitor (shown from gearbox side) (shown from secondary position indicator side with Y5-D21A-Z)
TASK FORCE TIPS, INC. 3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
MADE IN USA • www.tft.com
©Copyright Task Force Tips, Inc. 2013-2017 LIZ-050 July 25, 2017 Rev04
LIZ-050 - IVUM and IVUM RC
4" Industrial Valve Under
Monitor
Extend-A-Gun RC3 & RC4
Remote Control Telescoping Waterway
for Deck Mounted Monitors
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION, AND MAINTENANCE
Understand manual before use. Operation of this device without understanding the manual and
DANGER
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/
serial-number.
This equipment is intended for use by trained and quali ed emergency services personnel for
re ghting. All personnel using this equipment shall have completed a course of education
approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize re ghters and maintenance personnel with
the operation, servicing, and safety procedures associated with this product. This manual
should be kept available to all operating and maintenance personnel.
CONTROL BOX
(complete with 10 ft (3m) of power & communication cable
for connection to monitor communication link & power,
12 ft (3m) of cable for connection to RC monitor,
and 12 ft (3.6m) of cable for connection to RC Extend-A-Gun motor)
Shown with
Monsoon RC Monitor
and Master 2000 Nozzle.
OPTIONAL PUSHBUTTON STATION (Monitor, Nozzle and
Mounting Brackets not included)
(complete with 12 ft (3.6m) cable
for connection to control box)
TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
MADE IN USA • TFT.com
©Copyright Task Force Tips LLC. 2004-2020 LIX-530 March 17 2020 Rev15
LIX-530 - Extend-A-Gun
RC3 & RC4
LIY-050 August 17, 2020 Rev14