Setting Down, Transportation And Storage - Miele HS15 Operating Instructions Manual


When vacuuming, in particular
fine dust, e.g. sawdust, sand, plaster,
flour, talcum powder etc., electro-
static charges build up naturally. Un-
der certain conditions these charges
will be released. To avoid the un-
pleasant effects of these discharges,
a metal inlay has been incorporated
into the underside of the handle.
Please make sure that you keep your
hand in constant contact with this
metal strip during vacuuming.
Switching the Electrobrush on and
off
To use the Electrobrush, this must be
switched on additionally to the vacuum
cleaner.
 To do this, press the On/Off button 
on the Comfort handle.
The LED on the Comfort handle will
light up.
This means that you can switch the
Electrobrush off during vacuuming and
the vacuum cleaner will continue to op-
18
erate using suction only. This is useful
when moving from vacuuming a fitted
carpet to a rug, for example.
Interrupting operation
The vacuum cleaner can be paused for
short breaks whilst vacuuming.
 To do this, press the Standby button
 on the Comfort handle.

The Standby button is designed
to pause the vacuum cleaner for
short periods of time whilst vacuum-
ing. Do not leave the vacuum cleaner
in Standby mode for long periods.
Otherwise there is a risk of overheat-
ing and damage.
Setting down, transportation
and storage
Park System for pauses during vacu-
uming
(cannot be used with the Electrobrush)
The Park System allows you to conveni-
ently park the suction tube and floor-
head during pauses.