Miele HS15 Operating Instructions Manual page 49

 To detach the floorhead from the suc-
tion tube press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
Using the standard AllTeQ floorhead
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
This floorhead can be used for all nor-
mal cleaning of carpets, rugs and hard
flooring which is not susceptible to
scratching.
To adjust the standard AllTeQ floor-
head
Vacuum carpets and rugs with the
brush retracted:
 Press the foot control .
Clean hard flooring which is not sus-
ceptible to scratching, as well as floor-
ing with gaps or deep crevices in it with
the brush protruding:
 Press the foot control .
Activating the exhaust filter
timestrip® change indicator on the
exhaust filter
The exhaust filter timestrip® change in-
dicator shows the remaining functional
life of the exhaust filter.
 Press the release catch for the dust
compartment lid and raise the lid as
far as it will go.
 Remove the indicator strip.
 Press the exhaust filter timestrip®
change indicator.
13