Y
Tools Required:
Power Driver
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling codes. Use
these codes to identify material type for recycling. Non marked components should
be treated as mixed plastic. Ferrous metals can be identified using a small magnet
for recycling. Non-ferrous metals should be separated and recycled separately.
Disassembly Steps:
1. Lay chair on back.
Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Aeron, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.
Sense, Setu, Tu and Sayl are among the trademarks of Herman Miller, Inc.
TM
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
2 lbs Hammer
Torx Bit
Aeron
Safety Glasses
Rubber Mallet
2. Grasp and pull to remove
casters from the base.
Disassembly for Recycling
®
Part no. 1b9vtf rev A.
1
Need help?
Do you have a question about the Aeron and is the answer not in the manual?
Questions and answers