Mx 78 And Mx 86 Models - Palazzetti ECOMONOBLOCCO MX Installation And Maintenance Manual

6.3.2 mX 78 and mX 86 models

1) Position the lateral refractory and the elbow
being sure to insert them in the appropriate
slots (A) (Fig. 19).
2) Block the refractory with the bracket (b)
being sure to insert the slots in the relevant
projections and secure it with the appropriate
screws (c) (Fig. 20).
B
3) Proceed in the same way on the opposite side
(in the mX R and mX l models there are only
the elbow and the upper bracket (b - Fig. 20)
due to the presence of the side glass).
32
A
Fig. 19
C
Fig. 20
4) Place the refractory backrest (D) behind the
bracket (E) and make sure that the post com-
bustion outlet holes are centred with the slot
on the panel (Fig. 21).
D
E
5) Block the refractory with the bracket (F) fixing
it with the appropriate screws (G) (Fig. 22).
G
F
Fig. 21
Fig. 22
004778411 - 18/09/2020