Air Intake - Palazzetti ECOMONOBLOCCO MX Installation And Maintenance Manual

A
H=2D
D

5.7 Air intake

The Ecomonoblocco must have the correct
quantity of combustion air to ensure correct
combustion.
There must be an outside air intake to
guarantee the flow of combustion air
to the appliance and/or recirculation of
the ambient air.
The air intake must be correctly sized and pro-
tected by an insect-proof grate; it must also be
positioned in such a way as not to be accidentally
obstructed.
In accordance with local regulations in force,
there are two possible configurations for the
combustion air intake:
• (Fig. 11): external air intake (c) channelled to the
fire box. Lower grate (A) supplied for the recir-
culation of ambient air on the lining;
004778411 - 18/09/2020
ITALIANO ENGLISH
max 45°
Fig. 10
DEUTSCH
C
A
The image is purely indicative. L'immagine è puramente indicativa.
• (Fig. 12): air intake (F) on the lining, channelled
to the fire box. Lower grate (A) supplied on the
lining and wall hole (b) for the recirculation of
ambient air.
B
F
The image is purely indicative.
L'immagine è puramente indicativa.
The Ecomonoblocco is equipped, on the right
side, with a dedicated flange (D) with a diameter
of 110 mm, for the inlet of combustion air.
The heat recovery grate (E) supplied with the
product must be positioned on the top part of
the lining.
In the case in the room where is located the
fireplace there are one or more extraction fans
operating (suction hoods) malfunctions to the
combustion may occur caused by a shortage of
combustion air.
FRANÇAIS ESPAÑOL
E
D
Fig. 11
E
D
A
Fig. 12
29